ABLIC线性稳压器（LDO稳压器）

线性稳压器（LDO稳压器）

ABLIC线性稳压器（LDO稳压器）

ABLIC的线性稳压器（LDO稳压器）具有低电流消耗、高耐压、宽工作电压范围、超小封装和高纹波抑制比的特点。我们的LDO稳压器有助于实现电源电路的低功耗、稳定运行和高可靠性。ABLIC提供各种各样的产品线，包括软启动电路、涌流限制电路、放电分流功能、输出电压外部设置、无输出电容器、电源分压输出，以满足客户的需求。

* ABLIC电压调节器（LDO调节器）产品线已更名为“线性调节器”（LDO稳压器）。这只是名称的更改，不影响产品规格或性能。请注意，我们的一些数据表和其他出版物中仍可能使用以前的名称。

一般用途（For General use）

Series Name	Features	VIN min. [V]	VIN max. [V]	IOUT [mA]	VOUT [V]	VDROP [V]	ISS [μA]	RR @1kHz [dB]	COUT [μF]
S-1112/1122	Conventional product with high ripple rejection	2	6.5	150	1.5-5.5	0.19	50	80	0.47
S-1132	0.1μF capacitor available	2	6.5	300	1.5-5.5	0.13	20	70	0.1
S-1133	External setting of Vout support, TS*	2	10	300	1.2-8.2	0.13	60	70	1
S-1142A/B	50V high input (low current consumption), TS*	3	50	200	2-15	0.35	4	50	0.1
S-1142C/D	50V high input (low current consumption), TS*	3	50	200	2-15	0.35	4	50	0.1
S-1167	Low current consumption, high ripple rejection	2	6.5	150	1.5-5.5	0.15	9	70	1
S-1170	TS*	2	6.5	800	1.5-5.5	0.12	80	70	4.7
S-1200	10V input support	2	10	150	1.5-5.5	0.14	18	70	0.1
S-1206	Super-low current consumption	1.7	6.5	250	1.2-5.2	0.15	1	-	0.1
S-1212B/D	36V high input, 105°C operation, TS, DS	3	36	250	2.5-16	0.35	6.5	40	1
S-1213	External setting of Vout support, 36V high input, 105°C operation, TS, DS	2.8	36	500	1.8-30	0.13	5	-	1
S-1214	External setting of Vout support, 36V high input, 105°C operation, TS, DS	2.8	36	1000	1.8-30	0.13	5	-	1
S-1222B/D	Low-profile 0.33mm(max.), low consumption, TS, DS	3	28	200	2.3-12	0.35	6.5	-	1
S-1312	0.8mm super-small package, TS, DS	1.5	5.5	150	1-3.5	0.16	20	75	0.22
S-1312xxxH	105°C operation, TS, DS	1.5	5.5	150	1-3.5	0.16	20	75	0.22
S-1313	0.8mm super-small package, TS, DS	1.5	5.5	200	1-3.5	0.16	0.9	-	0.1
S-1313xxxH	105°C Operation, 0.8mm super-small package, TS, DS	1.5	5.5	200	1-3.5	0.16	0.9	-	0.1
S-1317	Super-low current consumption, overcurrent protection	1.5	5.5	100	1	0.02	0.35	-	1
S-1318	Super-low current consumption, overcurrent protection	1.7	5.5	100	1.2	0.045	0.095	-	1
S-1324	Low consump., low noise 17μVrms	1.5	5.5	200	1-3.5	0.17	7	65	1
S-1333	0.8mm super-small package, TS, DS	1.5	5.5	300	1-3.5	0.14	25	75	1
S-1335	High ripple rejection, Soft start function, DS*	1.5	5.5	150	1-3.6	0.07	36	80	1
S-13A1	External setting of Vout support, ICL, TS, DS*	1.5	5.5	1000	1-5	0.07	60	70	2.2
S-13D1	2 LDO circuits, delay function, TS, DS	1.5	5.5	150	1-3.6	0.08	39	70	0.22
S-13R1	Reverse current protection, TS, DS	2	5.5	150	1.2-4	0.15	5	70	1
S-1701	1 LDO circuit + 1 detector circuit	2	6.5	400	1.5-5	0.14	85	70	1
S-1740/1741	Supply voltage divided output	1.5	5.5	100	1-3.5	0.02	0.5	-	1
S-812C	Low output current, 16V input	-	16	75	2-6	0.23	1	-	-
S-816	With an external transistor	2.5	16	1000	2.5-6	0.1	30	-	4.7
S-817	Low output current	-	10	75	1.1-6	0.25	1.2	-	0.1
S-818		-	10	300	2-6	0.3	30	-	2
S-87x	24V input support VR + detector	-	24	50	2.5-5.8	0.45	3	-	-
S-L2980	LP2980-equivalent	2	10	150	1.5-6	0.12	90	70	1
S-T111	TK111-equivalent	2	6.5	150	1.5-5.5	0.19	50	80	0.1

车载用（For Automotive）

Series Name	Features	Composition	Setting voltage	Accuracy	Current consumption	Package
S-8424A	Battery backup switching IC	2 voltage regulators + 3 voltage detectors +switch	Output voltage: 2.3 to 5.4 V (0.1V step) Detection voltage: 2.4 to 5.3 V (CS), 1.7 to 3.4 V (/PREEND/RESET)	±2%	15μA max. (Operating) 2.1μA max. (Back up)	TSSOP-8

ABLIC车载用线性稳压器（LDO稳压器）

ABLIC的车载用线性稳压器（LDO稳压器）提供了广泛的选择，包括0.8×0.8mm的超紧凑封装、高散热TO-252-5S封装、50V输入电压、仅2.0μa的低电流消耗（典型值）、快速瞬态响应和高纹波抑制。此外，还提供具有内置看门狗定时器、软启动功能或重置功能等功能的产品。

此外，我们的汽车线性调节器已通过AEC-Q100认证，并具备PPAP（生产零件批准流程）能力。这确保了高质量和可靠性，使其适用于牵引逆变器和发动机ECU等安全关键部件。我们还通过热模拟服务和提供FIT率来支持客户的汽车应用设计。

Series Name	Features	Type	VIN min. [V]	VIN max. [V]	IOUT [mA]	VOUT min. [V]	VOUT max. [V]	Vdrop typ. [V]
S-1142A/BxxH	50V high input (low current consumption)	LDO*	3	50	200	2	15	0.35
S-1142C/DxxA	50V high input (low current consumption)	LDO*	3	50	200	2	12	0.35
S-1142C/DxxH	50V high input (low current consumption)	LDO*	3	50	200	2	15	0.35
S-19200A/BxxA	50V high input (low current consumption)	LDO*	3	50	200	2	15	0.23
S-19200A/BxxH	50V high input (low current consumption)	LDO*	3	50	200	2	15	0.23
S-19212B/DxxA	36V high input (low current consumption)	LDO*	3	36	250	2.5	16	0.35
S-19212B/DxxH	36V high input (low current consumption)	LDO*	3	36	250	2.5	16	0.35
S-19213	36V high input (low current consumption)	LDO*	2.8	36	500	1.8	30	0.13
S-19214	36V high input (low current consumption)	LDO*	2.8	36	1000	1.8	30	0.13
S-19218	36V high input, Fast transient response, 0.1μF input capacitor available	LDO*	3	36	500	2.5	30	0.17
S-19222xxxA	36V high input, High ripple rejection, Fast transient response, 0.1μF input capacitor available	LDO*	3	36	300	1.8	30	0.25
S-19310	Monitors output voltage of built-in LDO voltage regulator	LDO+VD*	3	36	40	2.9	5.3	0.24
S-19311	Small, high heat dissipation	LDO+VD*	4	36	200	3	5.3	0.12
S-19312	Small, high heat dissipation	LDO+VD*	4	36	400	3	5.3	0.12
S-19315	Monitors voltage at SENSE pin connection	LDO+VD*	3	36	40	1	5.3	0.24
S-19316	Monitors input voltage of built-in LDO voltage regulator	LDO+VD*	3	36	40	1	5.3	0.24
S-19317	Low current consumption, High heat dissipation	LDO+VD*	3	36	250	3.3	5	0.1
S-19318	Low current consumption, High heat dissipation	LDO+VD*	3	36	500	3.3	5	0.1
S-19500/19501	Time-out WDT, WEN pin selectable	LDO + VD + WDT*	4	36	200	3	5.3	0.12
S-19502/19503	Time-out WDT, WEN pin selectable	LDO + VD + WDT*	4	36	400	3	5.3	0.12
S-19504/19505	Time-out WDT, WEN pin selectable	LDO + VD + WDT*	3	36	250	3.3	5	0.12
S-19506/19507	Time-out WDT, WEN pin selectable	LDO + VD + WDT*	3	36	500	3.3	5	0.12
S-19509	Time-out WDT with WEN pin, ON / OFF circuit	LDO + VD + WDT*	3	36	500	3.3	5	0.12
S-19514/19515	Window WDT, WEN pin selectable	LDO + VD + WDT*	3	36	250	3.3	5	0.12
S-19516/19517	Window WDT, WEN pin selectable	LDO + VD + WDT*	3	36	500	3.3	5	0.12
S-19518	Window WDT with WEN pin, ON / OFF circuit	LDO + VD + WDT*	3	36	250	3.3	5	0.12
S-19519	Window WDT with WEN pin, ON / OFF circuit	LDO + VD + WDT*	3	36	500	3.3	5	0.12
S-19700	Current monitoring, Current limit	LDO*	4.5	36	400	3.3	20	0.08
S-19701	Current monitoring, Current limit	LDO*	4.5	36	600	3.3	20	0.08
S-19720	Low offset voltage, Low current cunsumption during power-off, Reverse current protection	Tracker*	4	36	50	2	18	0.16
S-19721	Low offset voltage, Low current cunsumption during power-off, Reverse current protection, Anomaly notification	Tracker*	4	36	250	2	8	0.33
S-19243xxxA	10V input, 500mA output	LDO*	2.5	10	500	0.9	9	0.09
S-19243xxxH	10V input, 500mA output	LDO*	2.5	10	500	0.9	9	0.09
S-19244xxxA	10V input, 1000mA output	LDO*	2.5	10	1000	1	9	0.38
S-19244xxxH	10V input, 1000mA output	LDO*	2.5	10	1000	1	9	0.38
S-19246xxxH	10V input, 2000mA output	LDO*	2.5	10	2000	1	6	0.62
S-19253xxxH	6.5V input, 500mA output	LDO*	2.5	6.5	500	1	5.5	0.09
S-19254xxxH	6.5V input, 1000mA output	LDO*	2.5	6.5	1000	1	5.5	0.38
S-19251	0.8mm super-small package	LDO*	1.5	5.5	150	1	3.5	0.16
S-19252	High ripple rejection, Soft start function	LDO*	1.5	5.5	150	1	3.6	0.07
S-19255	High ripple rejection, 0.1μF input capacitor available, 1.0mm super-small package	LDO*	1.5	5.5	300	0.9	3.6	0.12

*WDT: Watchdog timer *VD: Voltage detector (Reset IC) *LDO: Low-dropout regulator *Tracker: Voltage tracker